The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011L-IN is the most basic model, with five Gigabit ethernet ports, five Fast ethernet ports, power jack and PoE support. It comes in a metal indoor case.

Itís powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license. Wall mount kit for network closet is available for purchase as an optional accessory.

Product specifications

Product code RB2011L-IN
CPU speed 600MHz
Current Monitor No
CPU AR9344
Max Power consumption 6W
Architecture MIPS-BE
LAN ports 10
Gigabit Yes
MiniPCI 0
Integrated Wireless No
PoE 8-28V DC on Ether1
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Dimensions 214x86mm
Temperature range -30C...+70C
RouterOS License L4

Ethernet throughput

RB2011 (all versions) (2-7 Port Test)64 byte frames512 byte frames1518 byte frames
IP FirewallConntrackModeMbpsFpsMbpsFpsMbpsFps
off off Bridging 77.31 151000 595.15 145300 1244.76 102500
on off Routing 65.95 128800 518.14 126500 1167.04 96100
on off Bridging 47.82 93400 368.64 90000 992.16 81700
on on Routing 41.22 80500 333 81300 952.09 78400
on on Bridging 34.1 66600 264.6 64600 765.07 63000
  1. All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
    Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
  2. Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.